Custom Queuing
Printed From: CertCities.com Forums
Forum Name: CCIE
Forum Discription: Discuss the CCIE written and lab here.
URL: http://certcities.com/forums/forum_posts.asp?tid=5059
Printed Date: 23 October 2007 at 3:21pm
Topic: Custom Queuing
Posted by: hudsonmbg
Subject: Custom Queuing
Date Posted: 18 June 2007 at 8:48am
Hi guys, I am trying to figure out what the commands below do to assign 50% guaranteed bandwidth to traffic from a web server, using custom queues.
access-list 182 permit tcp 167.1.4.119 eq www any
queue-list 1 protocol ip 1 list 182
queue-list 1 default 2
I am finding it difficult to understand why the above configuration above would allow me to allocate 50% bandwidth to traffic from the HTTP server. I have been going through some CCIE lab sessions and I am came across that string of commands.
Initially, I thought since just two queues have been created, the router will assign 50% to each class but I wanted to know if I am wrong or correct. I was restricted from using the policy-map command for this task.
-------------
Bishop(TCP/IP), CCNP |
Replies:
Posted by: Headhunter
Date Posted: 18 June 2007 at 12:49pm
why double post with 10 min difference in posts so this is not accidental...
-------------
Koen
CCSI#30501 CCNP CCIP CCVP CCSP CCDP CQS-Cisco Wireless LAN Design & Support Cisco Unity Design Specialist Cisco IP Telephony Design Specialist JNCIA-ER MCSE MCSA:Messaging |
|