IOS 12.4T
Printed From: CertCities.com Forums
Forum Name: CCNA/CCNP
Forum Discription: Discuss these Cisco networking certs and related technologies here.
URL: http://certcities.com/forums/forum_posts.asp?tid=15025
Printed Date: 31 January 2010 at 5:54am
Topic: IOS 12.4T
Posted by: Rocha
Subject: IOS 12.4T
Date Posted: 10 September 2009 at 10:40am
Does anyone know If the new CCNA exam covers the IOS 12.4 or 12.4T?
I'm studying for the test, using the study guide by Sybex, and it covers the IOS 12.4 version. Would that be current for the new exam? |
Replies:
Posted by: crstephens
Date Posted: 06 October 2009 at 12:51pm
| The version of the IOS doesn't matter, knowing what versions there are , the commands, sub-netting and the general logic behind is what matters. Where you might actually use this version is for the SDM. While always having the current IOS is recommended for security purposes. Hope this helps. |
Posted by: BosonMichael
Date Posted: 07 October 2009 at 1:14pm
As long as you're not studying something as ancient as 11.3, you should be fine. :)
-------------
BosonMichael
MCSE+I, MCSE: Security, MCSE: Messaging, MCDST, MCDBA, MCTS, OCP, CCNP, CCDP, CNE, SCSA, Security+, Linux+, Server+, Network+, A+
Served proudly, US Army, 98C Analyst, '89-'92 |
Posted by: abraxus0426
Date Posted: 04 November 2009 at 7:32am
| Cisco is not really good for letting you know that significant detail as the command syntax does change for certain things depending on the IOS version (ie 12.2 vs 12.4), so as a rule I tend to look at what the CCIE LAB will be using and start from there. In this case I would say 12.4(T) would be a safe bet for now. |
|