From  CertCities.com
PopQuiz

Cisco Exam #642-811: BCMSN Exam (Transcender, set 2)
Test your knowledge of advanced Spanning Tree concepts, VLANs, inter-VLAN routing and multicasting for your CCNP and CCDP with these 10 sample questions.

courtesy of   Transcender

1. Round-Robin load-balancing algorithm

2. Building Access

3. 30

4. "dynamic desirable" or "trunk"

5. The 1f is the HSRP group identifier for standby group 31.

6. 802.1x

7. 20 seconds

8. switchport access vlan dynamic

The 'switchport access vlan dynamic' command configures a port as eligible for dynamic VLAN access. Use the following steps to configure a port for dynamic VLAN assignment:

1. Enter interface configuration mode and the port to be configured.

Switch(config)#interface [interface]

2. Set the port to access mode.

Switch(config-if)#switchport mode access

3. Configure the port as eligible for dynamic VLAN access.

Switch(config-if)#switchport access vlan dynamic

NOTE: You must configure the switch as a VMPS client before the switch port can participate in the dynamic VLAN. This is done using the 'vmps server [ipaddress] primary' and 'vmps server [ipaddress]' global configuration commmands to specify the VMPS primary and secondary servers.

For more information, go here.

9. auxiliary VLANs

10. Server and Transparent

Questions and answers provided by Transcender. To order the full version of this exam simulation, click here.

More Pop Quiz:

 

 

top

Copyright 2000-2009, 101communications LLC. See our Privacy Policy.
For more information, e-mail .