Cisco Exam #642-502: SNRS Exam (Cisco Press)
Check your ability to secure networks with Cisco routers and switches for the CCSP with these 10 sample questions.
courtesy of Cisco Press
Question:
1. What command enables AAA on a NAS or a router?
a. aaa in
b. aaa on
c. aaa new-model
d. enable aaa
e. start aaa services
2. Which of the following is not part of the main services/modules that are installed for Cisco Secure ACS for Microsoft Windows?
a. CSMon
b. CSAdmin
c. CSAuth
d. CSACS
3. What is the minimum browser version that is supported by Cisco ACS version 3.3?
a. Netscape 6.02 and Microsoft Internet Explorer 6.0
b. Mosaic 3.0 and Microsoft Internet Explorer 5.5
c. Netscape 7.1 and Microsoft Internet Explorer 6.0 with SP1
d. Mosaic 3.0 and Netscape 7.02
4. What has to be enabled in order to use SDEE for notification?
a. FTP
b. TFTP
c. HTTP
d. TACACS
5. What are three methods of implementing port security?
a. Active secure MAC addresses, fixed secure MAC address, and closed secure MAC address
b. Static secure MAC address, dynamic secure MAC addresses, and sticky secure MAC addresses
c. Default secure MAC address, evasive secure MAC address, and evading secure MAC address
d. Stinky secure MAC addresses, dynamite secure MAC, and clammy secure MAC addresses
6. Approximately how much memory per connection does CBAC require?
a. 2 KB
b. 6 KB
c. 200 bytes
d. 600 bytes
7. What are the three roles the IEEE 802.1x framework defines in the authentication process?
a. Authentication server
b. Administrator
c. Authenticator
d. Supplicant
e. Client
f. Object
8. What valid IPsec transforms can be used in an IPsec tunnel configuration? (Select four.)
a. esp-md5-hmac
b. ah-sha-hmac
c. esp-aes (aes 128,192,256)
d. AH, DES
e. AH, AES-256
f. esp-sha-hmac
9. Which of the following CA services use X.509v3 certificates and support SCEP? (Select four.)
a. VeriSign Onsite 4.5
b. Entrust Technologies
c. Baltimore Technologies
d. Twarte 4.6
e. OpenSSL 3.0
f. Windows 2000 Certificate Server 5.0
10. What are the command modes on a Cisco router?
a. ROM read-only, privileged EXEC, and configuration EXEC
b. ROM read-only, privileged EXEC, and super EXEC
c. ROM monitor, user EXEC, and privileged EXEC
d. READ monitor, user EXEC, and super EXEC
e. ROM monitor, user EXEC, and configuration EXEC
1. Answer C is correct.
2. Answer D is correct.
3. Answer C is correct.
4. Answer C is correct.
5. Answer B is correct.
6. Answer D is correct.
7. Answers A, C and D are correct.
8. Answers A, B, C and F are correct.
9. Answers A, B, C and F are correct.
10. Answer C is correct.
Questions and answers provided by Cisco Press. To order the full version of this exam simulation, click here.
More Pop Quiz:
|
